Dell iDRAC7, Руководство пользователя

Страница: 203 / 252

To format vFlash partition:
1. In iDRAC7 Web interface, go to Overview
→
Server
→
vFlash
→
Format.
The Format Partition page is displayed.
2. Enter the required information and click Apply.
For information about the options, see the
iDRAC7 Online Help
.
A warning message indicating that all the data on the partition will be erased is displayed.
3. Click OK.
The selected partition is formatted to the specified file system type. An error message is displayed if:
– The card is write-protected.
– An initialize operation is already being performed on the card.
Viewing Available Partitions
Make sure that the vFlash functionality is enabled to view the list of available partitions.
Viewing Available Partitions Using Web Interface
To view the available vFlash partitions, in the iDRAC7 Web interface, go to Overview
→
Server
→
vFlash
→
Manage.
The Manage Partitions page is displayed listing the available partitions and related information for each partition. For
information on the partitions, see the
iDRAC7 Online Help
.
Viewing Available Partitions Using RACADM
To view the available partitions and their properties using RACADM:
1. Open a Telnet, SSH, or Serial console to the system and log in.
2. Enter the following commands:
– To list all existing partitions and its properties:
racadm vflashpartition list
– To get the status of operation on partition 1:
racadm vflashpartition status -i 1
– To get the status of all existing partitions:
racadm vflashpartition status -a
NOTE: The -a option is valid only with the status action.
Modifying a Partition
You can change a read-only partition to read-write or vice-versa. Before modifying the partition, make sure that:
• The vFlash functionality is enabled.
• You have Access Virtual Media privileges.
NOTE: By default, a read-only partition is created.
Modifying a Partition Using Web Interface
To modify a partition:
1. In the iDRAC7 Web interface, go to Overview
→
Server
→
vFlash
→
Manage.
203