manualshive.com logo in svg

Dell DR series, Руководство администратора

Dell DR series - решение для резервного копирования данных, ускорения восстановления после сбоев и оптимизации хранилищ. Скачайте бесплатно Руководство администратора для управления устройством. Посетите manualshive.com для загрузки.

Поделиться
Скачать
background image

DR Series System and Data Operations

Data is stored and resides on the Dell DR Series system, a two-rack unit (RU) appliance, which comes preinstalled with 
the system software.
The DR Series system consists of a total of 14 drives. Two of these drives are 2.5-inch drives that are configured as a 
Redundant Array of Independent Disks (RAID) 1 on the RAID Controller and this is considered to be volume 1. In the 
DR4000 system, these drives are internal, while in the DR4100 system, these drives are accessible from the rear. The 
data that is being backed up is stored on the 12 virtual disks that reside on the DR Series system appliance. The DR 
Series system also supports additional storage in the form of external expansion shelf enclosures (see the 

DR Series 

Expansion Shelf 

section in this topic). The hot-swappable data drives that are attached to the RAID controller are 

configured as:

•

11 drives that operate as RAID 6, which act as virtual-disks for data storage (drives 1–11).

•

The remaining drive (drive 0) acts as the dedicated hot-spare drive for RAID 6 for the system.

The DR Series system supports RAID 6, which allows the appliance to continue read and write requests to the RAID 
array virtual disks even in the event of up to two concurrent disk failures, providing protection to your mission-critical 
data. In this way, the system design supports double-data drive failure survivability.
If the system detects that one of the 11 virtual drives has failed, then the dedicated hot spare (drive slot 0) becomes an 
active member of the RAID group. Data is then automatically copied to the hot spare as it acts as the replacement for 
the failed drive. The dedicated hot spare remains inactive until it is called upon to replace a failed drive. This scenario is 
usually encountered when a faulty data drive is replaced. The hot spare can act as replacement for both internal 
mirrored drives and the RAID 6 drive arrays.

Figure 1. DR Series System Drive Slot Locations

Drive 0 (top)

Drive 3 (top)

Drive 6 (top)

Drive 9 (top)

Drive 1 (middle)

Drive 4 (middle)

Drive 7 (middle)

Drive 10 (middle)

Drive 2 (bottom)

Drive 5 (bottom)

Drive 8 (bottom)

Drive 11 (bottom)

DR Series Expansion Shelf

Each DR Series system appliance supports the installation and connection of Dell PowerVault MD1200 data storage 
expansion shelf enclosures. Each expansion shelf contains 12 physical disks in an enclosure, which provides additional 
data storage capacity for the basic DR Series system. The supported data storage expansion shelves can be added in a 
variety of capacities based on your DR Series system version; for details, see the 

Dell DR Series System Interoperability 

Guide

.

The physical disks in each expansion shelf are required to be Dell-certified Serial Attached SCSI (SAS) drives, and the 
physical drives in the expansion shelf uses slots 1–11 configured as RAID 6, with slot 0 being a global hot spare (GHS). 
When being configured, the first expansion shelf is identified as Enclosure 1 (in the case where two enclosures are 
added, these would be Enclosure 1 and Enclosure 2). Adding an expansion shelf to support the DR Series system 
requires a license. For more information, see 

Expansion Shelf Licenses

.

28

Содержание DR series





























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DR series

Panamax M8-HT-PRO Instructions For Use preview
M8-HT-PRO
Бренд: Panamax Страницы: 2
Panamax MB1500 Instructions Manual preview
MB1500
Бренд: Panamax Страницы: 33
INFOSEC UPS SYSTEM Z1 ZenCube EX 400 User Manual preview
Z1 ZenCube EX 400
Бренд: INFOSEC UPS SYSTEM Страницы: 34
T'nB ZEUS Instructions For Use Manual preview
ZEUS
Бренд: T'nB Страницы: 8
Tripp Lite AG-8862 Owner'S Manual preview
AG-8862
Бренд: Tripp Lite Страницы: 44
Online USV XANTO 1000 User Manual preview
XANTO 1000
Бренд: Online USV Страницы: 56
LESTAR N-410 Quick Start Manual preview
N-410
Бренд: LESTAR Страницы: 2
Salicru SLC ELITE MAX Series Installation And Operation Manual preview
SLC ELITE MAX Series
Бренд: Salicru Страницы: 80
KEHUA TECH KR-RM Series User Manual preview
KR-RM Series
Бренд: KEHUA TECH Страницы: 43
Eaton Ellipse PRO 650 Installation And User Manual preview
Ellipse PRO 650
Бренд: Eaton Страницы: 9
GE TLE Scalable Series Installation Manual preview
TLE Scalable Series
Бренд: GE Страницы: 53
Eaton 5E Manual preview
5E
Бренд: Eaton Страницы: 10
Unitek ALPHA 750 PS User Manual preview
ALPHA 750 PS
Бренд: Unitek Страницы: 19
CPI LS Series User Manual preview
LS Series
Бренд: CPI Страницы: 11
Emerson Liebert HiPulse E Series Communications Manual preview
Liebert HiPulse E Series
Бренд: Emerson Страницы: 44
Well STARK 1200 User Manual preview
STARK 1200
Бренд: Well Страницы: 19
Wieland wipos Operating Instructions preview
wipos
Бренд: Wieland Страницы: 4
Tripp Lite SmartOnline SU2200XLNAFTA Specifications preview
SmartOnline SU2200XLNAFTA
Бренд: Tripp Lite Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды