Dell DR series Скачать руководство пользователя страница 166

Страница: 166 / 188

Alert Message

Description/Meaning or Action

•

If none of these steps resolve the problem, replace the

storage controller battery.

device

> is missing.

•

Verify that the device is present, and then check that

the cables are properly connected. For more

information, see the

Dell DR Series System Owner’s

Manual

to verify the system cabling is correct.

•

Check the connection to the controller battery and the

status of battery health.

NOTE: A battery with a weak or depleted charge can
cause this warning.

Storage <

device

> has failed.

Check cable connections between the storage controller
and the enclosure or backplane.

Storage <

device

> is missing.

Perform the following:

•

Check SAS and power cable connections between the

storage controller and the enclosure or backplane.

•

Check the external enclosure management modules

(EMM) and PERC status LEDs.

NVRAM Alerts

NVRAM PCI Controller failed.

Replace the NVRAM PCI Controller.

NVRAM PCI Controller is missing.

Reinsert or replace the NVRAM PCI Controller.

Super Capacitor on the NVRAM PCI Controller failed.

Replace the NVRAM PCI Controller.

Super Capacitor on the NVRAM PCI Controller is missing. Replace the NVRAM PCI Controller.

Failed to check software compatibility.

Upgrade the DR Series system appliance (in the Software
Upgrade page, click Start Upgrade).

The system software package is incompatible with the
current software stack.

Upgrade the DR Series system appliance (in the Software
Upgrade page, click Start Upgrade).

PERC Alerts

The storage appliance failed to gather the system
diagnostics.

•

Resolve all issues in the DR Series system diagnostics

log bundle.

•

Re-attempt to collect the diagnostics log bundle.

•

Contact Dell Support for assistance.

Storage Appliance Critical Error: BIOS System ID is
incorrect for correct operation of this storage appliance.

•

The DR Series system appliance requires service.

•

Contact Dell Support for assistance.

166

Содержание DR series





























































































































































































Результаты поиска

Содержание DR series

Отзывы:

Dell DR series, Руководство администратора, Страница: 166 / 188

Результаты поиска

Содержание DR series

Отзывы: