Dell DR series Скачать руководство пользователя страница 155 | Manualshive

Страница: 155 / 188

Dell DR series Скачать руководство пользователя страница 155

3.

Click the View by Resource tab in the Selections pane, and select the dataset to be restored.

4.

Click Run Now to start the restore job.

5.

Click the Job Monitor tab to view the progress of the restore job operation you created.

Understanding the OST CLI Commands

The OpenStorage Transport (OST) --mode component supported in the DR Series system command line interface (CLI)

command supports three values, which represent optimized writes done via:

•

deduplication (--mode dedupe) The client will process hashing on data, so deduplication processing occurs on the

server side (client-side deduplication).

•

passthrough (--mode passthrough) The client will pass all data to DR for deduplication processing (appliance-side
deduplication).

•

auto (--mode auto)
DR will set the deduplication to Dedupe or Passthrough, based on the client’s number of cores and whether it is 32–

or 64–bit.

These OST commands are used in the following format: ost --update_client --name --mode.

NOTE: If an OST client has four or more CPU cores, it is considered to be dedupe-capable. However, the OST
client operating mode depends upon how it is configured in the DR Series system (Dedupe is the default OST
client mode). If the administrator did not configure an OST client to operate in a specific mode and it is dedupe-
capable, it will run in the Dedupe mode. If an OST client is not dedupe-capable (meaning the OST client has less
than four CPU cores), and the administrator sets it to run in the Dedupe mode, it will only run in the Passthrough
mode. If an OST client is set to run in Auto mode, the OST client will run in the mode setting determined by the
media server. The following table shows the relationship between the configured OST client mode types and the
supported client mode based on client architecture type and corresponding number of CPU cores.

Table 6. Supported OST Client Modes and Settings

OST Client Mode
Settings

32–Bit OST Client (4 or
more CPU cores)

64–Bit Client (4 or
more CPU cores)

32–Bit OST Client
(Less than 4 CPU
cores)

64–Bit OST Client
(Less than 4 CPU
cores)

Auto

Passthrough

Dedupe

Passthrough

Passthrough

Dedupe

Not Supported

Supported

Not Supported

Not Supported

Passthrough

Supported

Supported

Supported

Supported

Supported DR Series System CLI Commands for OST

The following are the supported DR Series system CLI commands for OST operations:

administrator@acme100 > ost

Usage:

ost --show [--config]

[--file_history] [--name <name>]

[--clients]

[--limits]

ost --setpassword

ost --delete_client --name <OST Client Hostname>

ost --update_client --name <OST Client Hostname>

--mode <auto|passthrough|dedupe>

155

«
...
153
154
155
156
157
...
»

Содержание DR series





























































































































































































Отзывы:

Нет отзывов