Compaq External RAID Controller & Subsystem Infortrend, Руководство по эксплуатации

Страница: 184 / 347

Fibre Operation
8-21
1.
Host HBA port name (WWPN) list:
Host A = 0x…F111
Host B = 0x…F112
Host C = 0x…F222
2.
Controller Configuration:
•
Logical drives are LD0 and LD1. LD0 is partitioned into two:
P0 and P1.
•
Filter Entry (LUN map) list
Configuration Procedure:
1.
Create an entry list for the specific logical unit from "View and
Edit Host LUN"\Host Channel\Create Host Filter Entry."
2.
Select Host Channel ID, and then select a configured logical unit
(a logical drive, logical volume, or one of its logical partitions) to
create the entry. The entry submenu will appear.
3.
Enter and modify the Host ID , Host ID Mask , Filter Type , and
Access Mode .
The exemplary entry list is shown below. Please refer to the
diagram above:
Entry 1: "LD0-P0, ID=0x…F111, Mask=0x…FFFE, Filter Type =
Include, Access Mode = Read/Write." It means Host A
and B can read/write P0 of LD0.
Entry 2 : "LD0-P1, ID=0x…F222, Mask=0x…FFFF, Filter Type =
Exclude, Access Mode = Read/Write." It means Host A
and B can read/write P1 of LD0, but this partition is
inaccessible for Host C.