Compaq External RAID Controller & Subsystem Infortrend, Руководство по эксплуатации

Страница: 341 / 347

Infortrend Index-2
Communications
Channel: Fibre 8-7
Communications over
drive loops 8-13
concurrent rebuild in
RAID (0+1) 1-11
Configuration on Disk B-2
Configuration
Procedure: LUN
Filtering 8-20
Connecting Drives with
Fibre Channel Dual
Loop 8-10
Connection Type 8-10
Controller
Communications Over
Fibre Loops 8-12
Controller Failover and
Failback 10-9
Controller Failure 10-13
Controller Name: LCD 5-37
Controller Name:
terminal 7-37
controller naming 5-37, 7-37, 7-
39, 8-11
Controller Parameter
Settings 2-10
Controller Parameters:
LCD 5-37
Controller Parameters:
terminal 7-37
controller reset 5-35, 7-36
controller temperature
sensors B-9
Controller Unique
Identifier 8-11
Controller Unique
Identifier: LCD 5-37
Controller Unique
Identifier: terminal 7-39
Controller Voltage and
Temperature: LCD 4-6
Controller Voltage and
Temperature: terminal 6-9
controller voltage
monitors B-9
Controller/Logical Drive
Shutdown B-3
Copy and Replace
Drives 12-7
Creating a Logical
Drive: LCD 5-6
Creating a Logical
Drive: terminal 7-5
Creating a Logical
Volume: LCD 5-10
Creating a Logical
Volume: terminal 7-10
Creating LUN Masks 8-15
Creating Primary and
Secondary IDs 10-22, 10-29
Cylinder/Head/Sector
Mapping 9-16
D
Dedicated
Communications loops 8-12
default setting,
restoring 5-33
Deleting a Logical
Drive: LCD 5-16
Deleting a Partition of a
Logical Drive, LCD 5-17
Deleting a Partition of a
Logical Drive: terminal 7-17
Deleting a SCSI
Channel’s ID, LCD 5-27
Deleting a SCSI ID:
terminal 7-27
Deleting Logical Drive:
terminal 7-17
deleting partition of
logical drive 7-17
deleting SCSI ID 7-27
deleting spare drive,
global or local 7-24
Deleting Spare Drive:
LCD 5-25
Deleting Spare Drive:
terminal 7-24
deleting, LUN
mappings 5-22
deleting, partition of
logical drive 5-17
deleting, SCSI channel
ID 5-27
deleting, spare drive,
global or local 5-25
Detect Only 9-9
Detect, Clone+Replace 9-10
Detect, Perpetual
Clone 9-9
Detection of Drive Hot
Swap Followed by Auto
Rebuild 9-22
detection, idle drive 9-23