Advanced Configurations
9-28
Verification on Writes
Errors may occur when a hard drive writes data. To avoid the write
error, the controller can force hard drives to verify written data.
There are three selectable methods:
!
Verification on LD Initialization Writes
Performs Verify-after-Write when initializing a logical drive
!
Verification on LD Rebuild Writes
Performs Verify-after-Write during rebuild process
!
Verification on LD Normal Drive Writes
Performs Verify-after-Write during normal I/Os
Each method can be enabled or disabled individually. Hard drives
will perform Verify-after-Write according to the selected method.
Move cursor bar to the desired item, then press
[ENTER]
.
Choose
Yes
in the confirm box to enable or disable the function.
Follow the same procedure to enable or disable each method.
IMPORTANT!
•
The “verification on Normal Drive Writes” method will affect the “write”
performance during normal use.
Содержание External RAID Controller & Subsystem Infortrend
Страница 231: ...Infortrend 10 18 operating in write back mode it is recommended to install a battery module to each controller...
Страница 249: ...Infortrend 11 2 LN SB FL NAME Disk reserved space Partition Information LG Partition Size MB LG Partition Size MB...
Страница 276: ...Array Expansion 12 17 Drive E now has a capacity of about 25GB...
Страница 327: ...Event Messages D 27...