Compaq External RAID Controller & Subsystem Infortrend, Руководство по эксплуатации

Страница: 128 / 347

Terminal Operation
7-9
The completion of array creation will be indicated by the above message
prompt.
A controller event will then prompt to indicate the logical drive
initialization has begun. Tap
[ESC] to cancel the “Notification”
prompt and a progress indicator displays on the screen as a
percentage bar.
The array initialization runs in the background while you can start
using the array or continue configuring your RAID system.
When a fault-tolerant RAID level (RAID 1, 3, or 5) is selected, the
controller will start initializing parity.
Use the [ESC] key to view the status of the created logical drive.
IMPORTANT!
• Mind that only logical drives with RAID level 1, 3 and 5 will take the time
to initialize the logical drive. Logical drives with RAID level 0 and NRAID
do not have the necessity to perform logical drive initialization; the drive
initialization will be finished almost immediately.