Compaq External RAID Controller & Subsystem Infortrend, Руководство по эксплуатации

Страница: 198 / 347

Infortrend
9-13
Maximum Queued I/O Count:
This function allows you to configure the maximum number of I/O
queue the controller can accept from the host computer.
Choose “Host-side SCSI Parameters,” then press [ENTER] . Choose
“Maximum Queued I/O Count,” then press [ENTER] . A list of
available selections will appear. Move cursor bar to an item, then
press
[ENTER] . Choose Yes in the dialog box that follows to
confirm the setting.
The controller supports the following Host-side SCSI configurations:
“Maximum Queued I/O Count,” “LUNs per Host SCSI ID,” “Num
of Host-LUN Connect,” “Tag per Host-LUN Connect,” “Peripheral
Dev Type Parameters,” and “Cyl/Head/Sector Mapping Config.”
LUNs per Host SCSI ID
Choose “LUNs per Host SCSI ID,” then press [ENTER] . A list of
selections will appear. Move cursor bar to an item, then press
[ENTER] . Choose Yes in the dialog box that follows to confirm the
setting.
LUN Applicability:
If no logical drive has been created and mapped to a host LUN, and
the RAID controller is the only device connecting to the host SCSI
card, usually the operating system will not load the driver for the