Club Car Pioneer 900, Руководство по техническому обслуживанию

Страница: 73 / 344

STEERING AND FRONT SUSPENSION Rack and Pinion
2001 Pioneer 900 Gasoline Vehicle Maintenance and Service Manual Page 7-9
7
4. Remove the hex nut (29) and slide off the dust seal bellows (1) (Figure 7-12, Page 7-11).
5. Remove the retaining ring (21), then slide off dust seal bellows (20) (Figure 7-12, Page 7-11).
6. Remove the rack screw lock nut (15), rack guide screw (16), rack guide pressure spring (14), and the
rack guide (13) (Figure 7-12, Page 7-11).
7. Remove the universal joint assembly from the pinion (8) by fully removing the bolt and then sliding off
the universal joint (Figure 7-12, Page 7-11).
8. If necessary, remove the dust seal (12) (Figure 7-12, Page 7-11). See following NOTE.
NOTE: If the dust seal (12) is removed, replace with a new one (Figure 7-12, Page 7-11).
Figure 7-9 Remove Pinion from Housing Figure 7-10 Remove Bearing from Pinion
Figure 7-11 Secure Rack in Vise
Pry or bump pinion gear
out with universal
joint reinstalled.
PRESS RAM
PINION GEAR
BEARING
Secure rack using wood
blocks and a vise.
TAB WASHER
INNER
BALL
JOINT
3
4