Club Car Pioneer 900, Руководство по техническому обслуживанию, Страница: 50 / 344

WHEEL BRAKE ASSEMBLIES Brake Assembly Cleaning
Page 6-4 2001 Pioneer 900 Gasoline Vehicle Maintenance and Service Manual
6
Brake Assembly Cleaning, Continued:
∆ WARNING
• Apply grease carefully when performing the following steps. Do not allow any grease to get on
the friction surfaces of the brake shoe pads. Failure to heed this warning could cause
diminished brake performance, possibly resulting in property damage or severe personal
injury.
4. Use a small brush to carefully apply a liberal amount of white lithium NLGI #2 (Dow Corning BR2-Plus
or equivalent) on each of the six raised bosses on brake backing plate (Figure 6-7, Page 6-4). See
preceding WARNING.
5. Use a small brush to carefully apply a liberal amount of white lithium NLGI #2 grease (Dow Corning
BR2-Plus or equivalent) to each end of both brake shoes and into the slots in the brake shoe mounting
block as shown (Figure 6-8, Page 6-4). See preceding WARNING.
6. Use a small brush to carefully apply a liberal amount of white lithium NLGI #2 grease (Dow Corning
BR2-Plus or equivalent) to the brake actuator assembly as shown (Figure 6-9, Page 6-4). See preced-
ing WARNING.
Figure 6-6 Lubricate Slide Figure 6-7 Grease Raised Bosses
Figure 6-8 Grease Shoes Figure 6-9 Grease Actuator
1
2
BOSSES
BOSSES
J10