Club Car Pioneer 900, Руководство по техническому обслуживанию, Страница: 283 / 344

UNITIZED TRANSAXLE Unitized Transaxle Removal
2001 Pioneer 900 Gasoline Vehicle Maintenance and Service Manual Page 16-11
16
7. Using a hydraulic jack placed under the transaxle (Figure 16-21, Page 16-11), raise the vehicle and
place jack stands, set approximately 17-1/2 inches (44.5 cm) in height, under the frame as shown (Fig-
ure 16-22, Page 16-11).
8. Remove the hydraulic jack from beneath the vehicle.
9. Remove the bolts securing the leaf springs to their front mounts (Figure 16-23, Page 16-11).
10. Remove the bolts that secure the leaf springs to the shackles (Figure 16-24, Page 16-11).
11. With the hydraulic jack, slowly lower the powertrain until both of the rear tires are resting on the floor.
12. Carefully lift the snubber out of the snubber bracket in the vehicle frame and lower it to the floor (Figure
16-25, Page 16-12). The powertrain should be completely disconnected from the vehicle and resting
on the floor.
Figure 16-21 Raise Vehicle Figure 16-22 Position Jack Stands
Figure 16-23 Spring Retainer Bolts Figure 16-24 Rear Shackles
PROPER POSITIONING
OF FLOOR JACK
PROPER POSITIONING
OF JACK STANDS
APPROX.
17-1/2" (44.5 cm)
Use a 9/16 inch socket and
wrench to remove leaf spring
retainer bolt and nut.
Remove bolts, then
rotate shackles up
and away from springs.