Club Car Pioneer 900, Руководство по техническому обслуживанию

Страница: 63 / 344

WHEEL BRAKE ASSEMBLIES Brake Adjustment
2001 Pioneer 900 Gasoline Vehicle Maintenance and Service Manual Page 6-17
6
EQUALIZING BRAKE CABLES
1. Set park brake in the third tooth of the ratchet. Place a wedge between the park brake pedal and brake pedal
to prevent the park brake from disengaging while equalizing the brake cables (Figure 6-27, Page 6-17).
2. Equalize the brake cables.
2.1. Tighten the nylon locknut (6) on the front equalizer rod (2) to 35 in-lb (4 N·m) (Figure 6-28, Page 6-17).
2.2. Tighten the jam nut (5) on the rear equalizer rod (2) clockwise to 35 in-lb (4 N·m) (Figure 6-29,
Page 6-17).
2.3. Repeat steps 2.1 and 2.2 until the nuts remain on the torque setting.
2.4. Hold the locknut (6) on the front equalizer rod (2) in place with a wrench and tighten the jam nut
(1) to 13 ft-lb (17.6 N·m) (Figure 6-28, Page 6-17).
2.5. Hold the jam nut (5) on the rear equalizer rod (2) in place with a wrench and tighten the locknut (1)
to 13 ft-lb (17.6 N·m) (Figure 6-29, Page 6-17).
∆ CAUTION
• If the brake pedal return spring (6) was disconnected while equalizing the brake cables, be sure to
reconnect it before proceeding (Figure 6-29, Page 6-17).
Figure 6-27 Set Park Brake and Insert Wedge
Figure 6-28 Adjust Front Equalizer Figure 6-29 Adjust Rear Equalizer
PARK
STOP
GO
1 3
2
5
6
2
5
6
1
4