Club Car Pioneer 900, Руководство по техническому обслуживанию, Страница: 56 / 344

WHEEL BRAKE ASSEMBLIES Brake Cluster Removal and Installation
Page 6-10 2001 Pioneer 900 Gasoline Vehicle Maintenance and Service Manual
6
FRONT BRAKE CLUSTER REMOVAL
1. Place chocks at rear wheels, loosen lug nuts on front wheels and lift the front of the vehicle with a
chain hoist or floor jack. Place jack stands under the round tube crossmember of the frame and lower
the vehicle to let the jack stands support vehicle.
2. Release park brake.
3. Loosen the equalizer retaining nuts (1 and 6) on the front equalizer rod (2) to slightly loosen the brake
cable (Figure 6-16, Page 6-9, Detail B).
4. Remove the front wheels and then the brake drums.
5. Remove cotter pin (17) and clevis pin (16) from brake cable (Figure 6-15, Page 6-8).
6. Remove dust cap (6) on hub and bearing assembly (Figure 6-17, Page 6-10).
7. Remove cotter pin (5) and hex nut (7) from spindle shaft (Figure 6-17, Page 6-10).
8. Remove hub and bearing assembly from spindle shaft. Remove four bolts (22), cone washers (21), lock
washers (20) and hex nuts (19) that mount the brake assembly to the spindle (Figure 6-15, Page 6-8).
9. Remove brake cluster assembly from spindle.
Figure 6-17 Front Spindle Assembly
6
11
10
1
2
3
TYPICAL
4 PLACES
4
5
9
8
7