Club Car 1996 DS Golf Car Gasoline, Руководство по обслуживанию

Страница: 82 / 544

Page 7-6
7
E
G
Removal of Brake Shoes and Cleaning of Wheel Brake Assemblies, Continued:
12. Use a brush to apply a liberal amount of white lithium NLGI #2 grease (Dow Corning BR2-Plus or
equivalent) to the brake adjuster assembly, adjuster wheel shoe slots, and the shaft of the adjuster
wheel as shown (Figure 7-10, Page 7-5). See WARNING at bottom of page 7-4.
13. Install the adjuster wheel into the adjuster assembly (Figure 7-11, Page 7-5).
INSTALLING THE BRAKE SHOES
1. Turn the adjusting wheel so that the shoe slot is vertical, then position the trailing shoe in the slots in
the shoe mounting block and adjuster assembly. See NOTE below.
• THE TRAILING SHOE HAS 17T STAMPED INTO THE TIP OF THE SHOE FLANGE (Figure 7-11).
THE LEADING SHOE IS STAMPED 17L. WHEN INSTALLING THE SHOES, THE STAMPINGS ON
BOTH SHOES SHOULD BE ORIENTED TO THE TOP OF THE BRAKE ASSEMBLY. WHEN
INSTALLING THE SHOES ON THE PASSENGER SIDE OF THE VEHICLE, THE SIDE OF THE
TRAILING SHOE FLANGE MARKED 17T SHOULD BE FACING OUT AND BE VISIBLE. ON THE
DRIVER SIDE, THE 17L ON THE LEADING SHOE SHOULD BE FACING OUT AND BE VISIBLE.
• WHEN INSTALLED ON THE BACKING PLATE, THE LEADING SHOE (STAMPED 17L) IS
ALWAYS ORIENTED TOWARD THE REAR OF THE VEHICLE.
FIGURE 7-12 FIGURE 7-13
FIGURE 7-14 FIGURE 7-15
NOTE
DEPRESS RETAINER CLIP (A) WITH
PLIERS AND TURN CLIP RETAINER (B)
WITH NEEDLE NOSE PLIERS
A
B
; y
NOTE THAT THE SILVER
SPRING IS MOUNTED WITH
THE COILS TO THE SIDE OF THE
ADJUSTMENT LEVER SPRING (A)
SPRING COILS
SILVER SPRING
A
BRONZE SPRING
FRONT OF
VEHICLE
; y
AFTER ATTACHING SPRINGS TO TRAILING SHOE, INSERT TIPS
OF LEADING SHOE INTO SLOTS IN SHOE MOUNTING BLOCK (A)
AND ADJUSTER ASSEMBLY (B). PUSH LEADING
SHOE DOWN INTO POSITION
B
LEADING SHOE
;;
;;
yy
yy
TRAILING
SHOE
A
FRONT OF
VEHICLE
;;
;;
yy
yy
;;
;;
yy
yy
AFTER SHOES ARE INSTALLED,
SLIDE THEM UP AND DOWN
TOGETHER APROX. 1/4" TO 3/8"
TO BE SURE THEY DO NOT BIND.
POSITION SHOE TIPS SO
THAT THEY ARE FLUSH AT THE
TOP WITH THE TOP SURFACES OF
THE WEDGE SHAPES ON THE SHOE
MOUNTING BLOCK
TIPS