Club Car 1996 DS Golf Car Gasoline, Руководство по обслуживанию

Страница: 214 / 544

Page 13-24
13
G
Engine Removal, Continued:
11. Remove muffler (See Exhaust System - Section 15).
12. Disconnect oil sending unit wire from engine crankcase.
13. Remove engine mounting hardware.
14. Lift engine from car.
15. Remove crankcase oil drain plugs and filler tube. Tip the engine slightly to allow all of the oil to drain
from the crankcase. Dispose of engine oil properly.
CRANKCASE COVER REMOVAL
1. Remove nuts and clamps at two-ended bolts (1 and 2) (Figure 13-43).
2. Remove the eight bolts (3) and take off the crankcase cover (4) (Figure 13-43).
3. Disconnect the oil sending wire from the cord connection. Remove the two mounting screws from the
inside of the cover. Remove the oil sending unit from the cover. To inspect and replace the oil sending
unit (See Test Procedure 21 - Section 12, Page 12-25).
4. Remove the crankcase cover gasket completely. It may stick to the flange surface of the crankcase.
CAMSHAFT AND TAPPETS
FIGURE 13-43 FIGURE 13-44
• IF THE CRANKCASE COVER STICKS, TAP LIGHTLY WITH A PLASTIC HAMMER ON ALTERNATE
SIDES NEAR THE DOWEL PINS.
FIGURE 13-45 FIGURE 13-46
4
1
3
2
1
NOTE
MEASURE IN 2 PLACES
90
°
APART
0
10
20
30
0
1
2
3
4
5
6
7
8
9
1
40
50
60
70
8
0