Club Car 1996 DS Golf Car Gasoline, Руководство по обслуживанию

Страница: 437 / 544

Page 21-45
E
21A
Test Procedure 34 - Z9 (Yellow Wire) and Z10 (Purple Wire) Continuity
1. Turn the key switch to OFF and place the forward and reverse switch in NEUTRAL. Disconnect the bat-
teries and disconnect the Z plug from the controller.
2. Disconnect the 3-wire connector (from potentiometer) at the connection below the charger receptacle.
3. Place the black (-) probe of a multimeter, set to ohms (
Ω
), in the yellow wire female terminal in the 3-
wire plug and place the red (+) probe in the Z9 (yellow wire) connector position in the Z plug (Figure
21-68). The reading should be continuity. If the reading is incorrect, repair or replace the yellow wire.
Make sure that the yellow wire is in the Z9 position on the Z plug, and that the wire terminals are secure
in the 3-wire plug and in the Z plug.
4. Place the black (-) probe of a multimeter, set to ohms (
Ω
), in the purple wire female terminal in the 3-
wire plug and place the red (+) probe in the Z10 (purple wire) connector position in the Z plug (Figure
21-69, Page 21-46). The reading should be continuity. If the reading is incorrect, repair or replace the
purple wire. Make sure that the purple wire is in the Z10 position on the Z plug, and that the wire termi-
nals are secure in the 3-wire plug and in the Z plug.
Test Procedure 35 - 3-Wire Plug on the Potentiometer
1. Turn the key switch to OFF and place the forward and reverse switch in NEUTRAL. Disconnect the bat-
teries. Leave the Z plug connected to the controller.
FIGURE 21-65 FIGURE 21-66
FIGURE 21-67 FIGURE 21-68
OFF
DC V
DATA HOLD
AC V
AC/DC 500V MAX
250V MAX
BATTERY BANK
-
+
+
-
-
-
+
+
2
3
4
6
5
RED PROBE
ON YELLOW
WIRE FEMALE
THREE WIRE
CONNECTION
OFF
DC V
DATA HOLD
AC V
AC/DC 500V MAX
250V MAX
BATTERY BANK
-
+
+
-
-
-
+
+
2
3
4
6
5
RED PROBE
ON PURPLE
WIRE FEMALE
THREE WIRE
CONNECTION
OFF
DC V
DATA HOLD
AC V
AC/DC 500V MAX
250V MAX
BATTERY
BANK
BLACK PROBE
ON WHITE/BLACK
WIRE FEMALE
THREE WIRE
CONNECTION
-
+
+
+
-
-
1
2
OFF
DC V
DATA HOLD
AC V
AC/DC 500V MAX
250V MAX
BLACK PROBE
ON YELLOW
WIRE FEMALE
THREE WIRE
CONNECTION
Z8 Z9 Z10 Z11 Z12 Z13
Z1 Z2 Z3 Z4 Z5 Z6
Z7
Z14
PLACE RED PROBE
INTO THE Z9 POSITION
ON THE Z PLUG