Cisco SRW208MP, Руководство администратора

Страница: 89 / 283

Configuring Discovery
Configuring LLDP
Cisco Small Business 200 Series Smart Switch Administration Guide 90
8
To view LLDP overloading information:
STEP 1
Click Administration > Discovery - LLDP > LLDP Overloading . The LLDP
Overloading page opens.
This page displays the following fields for each port:
• Interface —Port identifier.
• Total (Bytes) —Total number of bytes of LLDP information in each packet
• Left to Send (Bytes) —Total number of available bytes left for additional
LLDP information in each packet.
• Status —Whether TLVs are being transmitted or if they are overloaded.
STEP 2
To view the overloading details for a port, select it and click Details . The LLDP
Overloading Details opens.
This page displays the following information for each TLV sent on the port:
• LLDP Mandatory TLVs
- Size (Bytes) —Total mandatory TLV byte size.
- Status —If the mandatory TLV group is being transmitted, or if the TLV
group was overloaded.
• LLDP MED Capabilities
- Size (Bytes) —Total LLDP MED capabilities packets byte size.
- Status —If the LLDP MED capabilities packets were sent, or if they were
overloaded.
• LLDP MED Location
-
Size (Bytes)
—Total LLDP MED location packets byte size.
- Status —If the LLDP MED locations packets were sent, or if they were
overloaded.
• LLDP MED Network Policy
- Size (Bytes) —Total LLDP MED network policies packets byte size.
-
Status
—If the LLDP MED network policies packets were sent, or if they
were overloaded.
• LLDP MED Extended Power via MDI