Configuring Discovery
Configuring LLDP
Cisco Small Business 200 Series Smart Switch Administration Guide
74
8
STEP 3
In the
Fast Start Repeat Count
field, enter the number of times LLDP packets are
sent when the LLDP-MED Fast Start mechanism is initialized. This occurs when a
new endpoint device links to the switch. For a description of LLDP MED, refer to
the
LLDP MED Network Policy
section.
STEP 4
Click
Apply
. The LLDP properties are added to the Running Configuration file.
Editing LLDP Port Settings
Use the
Port Settings
page to activate LLDP and remote log server notification per
port, and to select the TLVs included in LLDP PDUs.
The LLDP-MED TLVs to be advertised can be selected in the
LLDP MED Port
Settings
page, and the management address TLV of the switch may be
configured.
To define the LLDP port settings:
STEP 1
Click
Administration
>
Discovery - LLDP
>
Port Settings
. The
Port Settings
page
opens.
This page displays the port LLDP information.
STEP 2
Select a port and click
Edit.
The
Edit LLDP Port Settings
page opens.
This page provides the following fields:
•
Interface
—Select the port to edit.
•
Administrative Status
—Select the LLDP publishing option for the port. The
values are:
-
Tx Only
—Publishes but does not discover.
-
Rx Only
—Discovers but does not publish.
-
Tx & Rx
—Publishes and discovers.
-
Disable
—Indicates that LLDP is disabled on the port.
•
System Log Notification
—Select
Enable
to notify notification recipients
that there has been a topology change.
The time interval between notifications is entered in the Topology Change
System Log Notification Interval field in the
LLDP Properties
page.
