Cisco ASR 900 Series Скачать руководство пользователя страница 90

Страница: 90 / 310

Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router

OL-26630-12

Chapter

Limitations and Restrictions

The following sections describe the Cisco ASR 903 Router limitations in IO S XE 3.7 releases:

•

Limitations and Restrictions in Cisco IOS XE Release 3.7(5)S, page 2

•

Limitations and Restrictions in Cisco IOS XE Release 3.7(4)S, page 2

•

Limitations and Restrictions in Cisco IOS XE Release 3.7(3)S, page 2

•

Limitations and Restrictions in Cisco IOS XE Release 3.7(2)S, page 2

•

Limitations and Restrictions in Cisco IOS XE Release 3.7(1)aS, page 3

•

Limitations and Restrictions in Cisco IOS XE Release 3.7(0)S, page 3

Limitations and Restrictions in Cisco IOS XE Release 3.7(5)S

There are no changes in limitations and restrictions in Cisco IOS XE Release 3.7(5)S; the restrictions
from IOS XE Release 3.7(2)S still apply.

Limitations and Restrictions in Cisco IOS XE Release 3.7(4)S

There are no changes in limitations and restrictions in Cisco IOS XE Release 3.7(4)S; the restrictions
from IOS XE Release 3.7(2)S still apply.

Limitations and Restrictions in Cisco IOS XE Release 3.7(3)S

There are no changes in limitations and restrictions in Cisco IOS XE Release 3.7(3)S; the restrictions
from IOS XE Release 3.7(2)S still apply.

Limitations and Restrictions in Cisco IOS XE Release 3.7(2)S

The following limitations and restrictions apply to Cisco IOS XE Release 3.7(2)S for the
Cisco ASR 903 Router:

•

LFA FRR Limitations—Release 3.7.2 has the following limitations for Loop Free Alternate
Fast-reroute (LFA FRR):

–

To enable LFA FRR, you must include the

mpls ldp explicit-null

command. The implicit-null

command is not supported.

–

LFA FRR is not supported with equal cost multipath (ECMP).

–

The ASR 903 supports up to 4000 LFA FRR routes.

–

Remote LFA tunnels are not HA aware; hence they are SSO co-existent but not SSO compliant.

•

The restrictions from IOS XE Release 3.7(0)S apply to Release 3.7(2). For more information, see

Limitations and Restrictions in Cisco IOS XE Release 3.7(0)S, page 3

Содержание ASR 900 Series























































































































































































































































































































Результаты поиска

Содержание ASR 900 Series

Отзывы:

Cisco ASR 900 Series, Руководство пользователя, Страница: 90 / 310

Результаты поиска

Содержание ASR 900 Series

Отзывы: