Cisco ASR 900 Series Скачать руководство пользователя страница 191

Страница: 191 / 310

Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router

OL-26630-12

Chapter

Caveats in Cisco IOS XE 3.8S Releases

•

CSCuc66393

Symptom:

The router loses OC-3 interface configurations after an ISSU upgrade.

Conditions:

Occurs on OC-3 serial and POS interfaces after an ISSU software upgrade.

Workaround:

There is no workaround.

•

CSCuc68699

Symptom:

The displays a segmentation fault error at cgmu_nq_ccm_convert and crashes.

Conditions:

Occurs when you perform the following actions:

–

Remove QoS policies from an EFP interface

–

Remove policy-maps and class-maps associated with the QoS policy.

Workaround:

There is no workaround.

•

CSCuc80957

Symptom:

The router crashes.

Conditions:

Occurs when you rest the 10 gigabit Ethernet interface module (IM) on a

non-redundant system using the

hw-module subslot reload

command.

Workaround:

Administratively shut down the IM before resetting the IM.

•

CSCuc81334

Symptom:

The router selects a clock source attached to standby RSP.

Conditions:

Occurs after a stateful switchover (SSO).

Workaround:

Remove and restore the clock source configuration.

•

CSCuc83088

Symptom:

The router drops traffic during stateful switchover (SSO).

Conditions:

Occurs when the router is running HSRP or VRRP; the issue only occurs when the

destination MAC address is a virtual MAC (vMAC) address.

Workaround:

Change the traffic priority and detour traffic prior to the SSO.

•

CSCuc87791

Symptom:

The router selects a network clock source before the wait-to-restore timer has expired.

Conditions:

Occurs under the following conditions:

–

A clock source fails, triggering the wait-to-restore timer (which specifies how long the before
including a restored clock source in the clock selection process.

–

The clock source becomes active and fails a second time before the wait-to-restore time has
passed.

Workaround:

There is no workaround; in some cases you can clear the issue by removing and

restoring the clock source configuration.

•

CSCuc90006

Symptom:

When you shut down a link within an Multiservice Transport Platform (MSTP) instance,

interfaces in other MSTP instances are blocked.

Conditions:

Occurs when the interface in the MSTP instance is the root port.

Workaround:

There is no workaround.

Содержание ASR 900 Series























































































































































































































































































































Результаты поиска

Содержание ASR 900 Series

Отзывы:

Cisco ASR 900 Series, Руководство пользователя, Страница: 191 / 310

Результаты поиска

Содержание ASR 900 Series

Отзывы: