manualshive.com logo in svg

Cisco ASR 900 Series, Руководство пользователя, Страница: 192 / 310

Поделиться
Скачать
Cisco ASR 900 Series Скачать руководство пользователя страница 192

 

40

Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router

OL-26630-12

Chapter

  Caveats in Cisco IOS XE 3.8S Releases

•

CSCuc92350

Symptom:

 A connection between two copper SFPs does not become active.

Conditions:

 Occurs when two SFP interfaces are connected with one side set to 100 Mbps and the 

other side set to 

negotiation auto

.

Workaround:

 Set the speed to 10Mbps at both sides, then configure negotiation auto on one side 

of the connection.

•

CSCuc93895

Symptom:

 The router has an Automatic Protection Switching (APS) switchover time of more than 

1 second. 

Conditions:

 Occurs on MLPPP interfaces configured at a high scale when the router is running with 

ICRM in SONET mode.

Workaround:

 There is no workaround.

•

CSCuc93985

Symptom:

 The router initiates an Automatic Protection Switching (APS) switchover during a high 

availability (HA) stateful switchover (SSO).

Conditions:

 Occurs during an HA SSO with single router APS (SR-APS).

Workaround:

 There is no workaround.

•

CSCuc95716

Symptom:

 FPGA software for the OC-3 interface module is not bundled with the XE 3.8 image.

Conditions:

 Occurs when upgrading FPGA on the OC-3 interface module.

Workaround:

 Manually upgrade the OC-3 FPGA.

•

CSCud01644

Symptom:

 The active forwarding processor (FP) is on the standby route switch processor (RSP).

Conditions:

 Occurs when you boot the two RSPs in quick succession and the FP on the standby RSP 

becomes active before the FP on the active RSP.

Workaround: 

Reload the router.

•

CSCud01908

Symptom:

 The 

show platform software object-manager fp active statistics

 command shows 

pending objects on the Forwarding Manager (FMAN) on the forwarding processor (FP), indicating 
a failure to download configurations from the Route Switch Processor (RSP) to the data plane (DP).

Conditions:

 Occurs when you apply a QoS shaping configuration at a high scale.

Workaround:

 There is no workaround. 

•

CSCud04407

Symptom:

 The router displays the following console error message: 

Error - packet with 

unsupported linktype 3

Conditions:

 Occurs when the router is passing traffic over the OC-3 interface module.

Workaround:

 There is no workaround.

•

CSCud04529

Symptom:

 The router shows traffic loss.

Содержание ASR 900 Series























































































































































































































































































































Отзывы:

Нет отзывов