
41
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-12
Chapter
Caveats in Cisco IOS XE 3.8S Releases
Conditions:
Occurs when the primary path is recovered via remote Loop Free Alternate Fast
Reroute (LFA FRR).
Workaround:
There is no workaround.
•
CSCud06744
Symptom:
The router does not download MPLS global prefixes.
Conditions:
Occurs under the following conditions:
–
You configure Loop Free Alternate Fast Reroute (LFA FRR) at a high scale.
–
The primary or backup paths flap multiple times.
Workaround:
There is no workaround.
•
CSCud06772
Symptom:
IPv6 neighbor discovery does not function properly after stateful switchover (SSO); the
router loses traffic and eventually recovers.
Conditions:
Occurs with IPv6 traffic after stateful switchover (SSO).
Workaround:
Configure software BFD sessions.
•
CSCud07642
Symptom:
The ASR 903 is unable to pass traffic to the ASR 9000.
Conditions:
Occurs with a clear-channel ATM over MPLS configuration using AAL0
encapsulation.
Workaround:
Enable MPLS control-word on the ASR 9000.
•
CSCud12587
Symptom:
When handling IS-IS packets, the router punts the traffic to the Route Switch Processor
(RSP) and applies policing to limit the traffic to 1 Mbps.
Conditions:
Occurs when you enable IS-IS over an Ethernet over MPLS (EoMPLS) connection.
Workaround:
Use IS-IS over another connection type or limit the IS-IS traffic to less than 1 Mbps.
•
CSCud13242
Symptom:
The ASR 903 does not display an alarm when nV satellite authentication fails.
Conditions:
Occurs when the ASR 9000 and ASR 903 are in an nV satellite configuration and the
routers are configured with a different serial-number value.
Workaround:
There is no workaround.
•
CSCud13535
Symptom:
The router drops imposition traffic sent to a neighbor device over a VPLS pseudowire.
Conditions:
Occurs when the neighbor device configuration includes the
no split horizon group
command.
Workaround:
Remove the
no split horizon group
command from the VPLS neighbor device.
•
CSCud15785
Symptom:
The router experiences flaps in REP traffic.
Conditions:
Occurs when the MAC limit feature is configured at a high scale.
Workaround:
Disable the MAC limiting feature.
•
CSCud24648
Содержание ASR 900 Series
