manualshive.com logo in svg

Cisco ASR 900 Series, Руководство пользователя, Страница: 200 / 310

Поделиться
Скачать
Cisco ASR 900 Series Скачать руководство пользователя страница 200

 

4

Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router

OL-26630-12

  Limitations and Restrictions

MPLS VPN Limitation

•

MPLS VPN (L3VPN) Fragmentation does not function properly if an access interface has a higher 
MTU value than a core interface. To ensure that fragmentation functions correctly, configure the 
core interface MTU with a value that exceeds the access interface MTU and relevant headers.

OC-3 IM Limitations

•

The 

configure replace

 command is not supported on the OC-3 IMs.

•

MPLS-TP is not supported over POS interfaces.

•

Multicast is not supported on OC-12 interfaces.

•

DS0 channelization is not currently supported.

•

MPLS is supported only on PoS interfaces; MPLS on T1/E1 links is not supported.

•

IP-FRR and BFD-triggered FRR are not supported on MPLS over POS links.

•

Fragmentation is not supported with Multicast traffic on PoS interfaces.

•

QoS is not supported for Multicast traffic on PoS interfaces.

•

QoS is supported on POS interfaces on optical interface module.

•

Three-level QoS policies are not supported on OC-3/OC-12 serial, MLPPP, and PoS interfaces. You 
can only apply two-level QoS policies.

•

The Synchronization Status Message (SSM) is not currently on OC-3 and OC-12 interfaces.

Pseudowire/AToM Limitation

•

The Cisco ASR 903 Router supports ATM over MPLS N-to-one cell mode for a single ATM Virtual 
Channel Connections (VCCs) or Permanent Virtual Circuits (PVCs) to a pseudowire, but does not 
support mapping to multiple VCCs or PVCs.

•

The Cisco ASR 903 Router does not support ATM over MPLS one-to-one cell mode.

•

The Cisco ASR 903 Router supports pseudowire ping using the CW method; pseudowire ping using 
the TTL method is not supported.

•

The Cisco ASR 903 Router supports a maximum of 2000 pseudowires in any combination.

•

The following features are not currently supported on pseudowire connections:

–

Ethernet VLAN to Ethernet VLAN L2VPN interworking (bridged and routed modes)

–

Ethernet VLAN to ATM AAL5 L2VPN Interworking (bridged and routed modes)

The following pseudowire (PW) features are not supported over MPLS-TP connections:

•

ATM OAM Cell Emulation for ATM AAL5 over MPLS on PVC and in VC Class.

•

BFD / VCCV over ATM AC over MPLS TP

•

Ethernet port to ATM AAL5 PVC L2VPN Interworking (bridged and routed modes)

•

MIB support including PW-TDM-MIB, PW-ATM-MIB, and PW-CESOPSN-MIB

•

N:1 PVC Mapping with non-unique VPI (N>1)

QoS Limitations

For a description of QoS features and limitations on the Cisco ASR 903 Router in Release 3.9S, see 

http://www.cisco.com/en/US/docs/routers/asr903/software/guide/chassis/Release3.9.0S/ASR903-Chas
sis-SW-39.html

Содержание ASR 900 Series























































































































































































































































































































Отзывы:

Нет отзывов