CAKEWALK sonar x3, Справочное руководство

Страница: 65 / 2094

65
Setup
Introduction
modes and the existing enabled devices will be remembered for the next time when you switch back
to that mode.
Loading a project after changing audio devices
When loading a project after changing audio devices, SONAR will attempt to automatically remap
any missing device to an equivalent new device. If an equivalent match is not found, the
Missing
Audio Outputs dialog box appears, allowing you to manually reassign any unresolved output ports.
The Missing Audio Outputs dialog box will suggest default assignments for any missing devices.
You can click OK to accept the assignments, or click Cancel to preserve the original missing device
assignments. You can also preserve the original missing device by selecting [Unassigned] from the
Available Devices list. If you choose not to reassign a missing device, the Output port selection in
SONAR will show the missing device name prefixed by MISSING .
Note: The Missing Audio Outputs dialog box is not shown if there is only a single missing output
port and only one available output port. In this case, SONAR will automatically assign the
missing output port to the available output port.