CAKEWALK sonar x3, Справочное руководство

Страница: 1673 / 2094

1673
Audio
Beginner’s guide to Cakewalk software
Audio
The audio format works by converting any sound that’s recorded into a long series of numbers,
storing and usually editing the numbers, and then converting the numbers back into sound.
When you record sound using this format, the microphone you use causes the voltage in its cable to
change rapidly as the mic’s diaphragm vibrates. These rapid changes in voltage are measured and
recorded by an
analog-to-digital converter , and these measurements make up what we call digital
audio. To convert digital audio back into sound, a digital-to-analog converter uses the stored
numbers to cause the voltage in a cable to change rapidly, and this voltage then moves the
diaphragm in a loudspeaker in a similar way to the way that the microphone’s diaphragm moved
originally (unless the numbers have been edited to produce a more desirable sound). These
converters, commonly referred to as A to D or A/D, and D to A or D/A, are part of your computer’s
sound card. Better sound cards usually keep their converters in a separate box that’s not in the
computer itself, because the computer’s fan and disk drives add noise to the sound card’s signal.
Digital audio works like cartoon animation. In a cartoon, a series of still photographs is displayed
rapidly in sequence to make it look as if the objects in the photographs are moving. When digital
audio is converted back into sound, the voltage is changed at regular intervals to simulate
continuous sound. To make high-quality sound, the original voltage during recording has to be
measured, or “sampled,” at rapid enough intervals to fool your ears into hearing continuous sound.
Audio CDs use a sampling rate of 44,100 per second. To store and edit so many numbers places a
big load on most PCs, much bigger than the processing of MIDI data causes.
For more information, see:
“Audio playback in SONAR” on page 1674
“Tracks” on page 1676
“Clips” on page 1677
“Track-by-track playback” on page 1678
“Connecting an instrument, home stereo, or microphone to your sound card” on page 1680
“Choosing inputs” on page 1686
“Audio recording” on page 1680
“Audio hardware (sound cards) and drivers” on page 1689
“Audio” on page 1673
“MIDI” on page 1665