CAKEWALK sonar x3, Справочное руководство

Страница: 798 / 2094

798
Editing MIDI events and continuous controllers (CC)
MIDI effects (MIDI plug-ins)
To quantize MIDI data
1. Select the data to be affected.
2. Right-click the selected clip(s) and choose Process Effect > MIDI Effects > Cakewalk FX >
Quantize on the pop-up menu.
3. Set the quantization parameters, as described in the table above.
4. Click OK .
SONAR applies the specified quantization to the selected data.
Adding Echo/Delay
Figure 260. MFX Echo/Delay
The Echo Delay command creates a series of repeating echoes of each note. The echo notes can
decrease or increase in velocity, and can be transposed from the original by regular intervals.
The parameters used to specify the echo/delay effect are as follows:
Offset (Ticks) The offset of the quantization grid from the start of measure boundaries. A value
of 0 indicates perfect alignment. Values less than 0 shift the grid points earlier;
values greater than 0 shift the grid later.
Randomize Causes a random time offset to be added to or subtracted from each new event
time. You must also specify the maximum offset, as a percentage of the
quantization resolution.
Parameter/Option Meaning
Decay (%) The reduction in velocity with each echo. A value greater than 100% indicates
an increase in velocity.
No. Echoes The number of echo notes for each original note. If the velocity reaches 0
before the specified number of echoes, the effect generates no more echo
notes.
Table 145.
Parameter/Option Meaning
Table 144.