CAKEWALK sonar x3, Справочное руководство

Страница: 1407 / 2094

1407
Initialization file format
Initialization files
VelocityAsBargraph=
<0 or 1> Boolean 0 By default, note velocity tails are displayed as
thin vertical lines in the Piano Roll view, and the
color is the same as note events. If “Notes/
Velocity” is not the current edit type, this color
will be slightly lightened.
To override this and use bar graph indicators
for velocity tails, add the following line to the
[WinCake]
section:
VelocityAsBargraph=1
VelocityBargraphFullWidth=<
0 or 1> Boolean 0 When displaying velocity tails as bar graphs
(see above), you can specify whether the
velocity tails should be fixed at 3 pixels wide
(default), or extend the full width of the note
event. To display full-width velocity tails, add
the following line to the
[WinCake]
section:
VelocityBargraphFullWidth=1
PRVUseForegroundColor=<
0 or 1> Boolean 1 The Piano Roll view and Inline Piano Roll note
event colors are based on the track color. By
default, note events use a track’s foreground
(data) color instead of the background (clip)
color.
To override this and use background colors
instead, add the following line to the
[WinCake]
section:
PRVUseForegroundColor=0
PRVColorizeVelocity=
<0 or 1> Boolean 1 By default, note events in the Piano Roll are
colorized based on velocity. Darker colors
indicate higher velocities.
To override this and use the static track color
instead, add the following line to the
[WinCake]
section:
PRVColorizeVelocity=0
MicroscopeHZoomThreshold
=<1..20> Integer 8 By default, the Microscope mode begins
horizontal magnification when a 32nd note is
narrower than 8 pixels. This line lets you
specify the horizontal zoom threshold (1-20
pixels).
MicroscopeHZoomMax=
<2.0 - 8.0> Integer 3.0 This line specifies the highest horizontal
magnification that will result when using
Microscope mode.
Variable Type Default value What it does
Table 239.