CAKEWALK sonar x3, Справочное руководство

Страница: 1527 / 2094

1527
Using Cyclone
Cyclone
To assign a loop to a pad
• Drag a loop from the Loop bin to a Pad.
OR
• Click a folder icon that’s on a particular Pad that you want to load a loop into. When the Open
dialog box appears, select a loop and click Open . Cyclone loads the loop into both the Pad where
you clicked the folder icon and the Loop bin.
OR
• Drag a loop onto a Pad from SONAR‘s Clips pane or Media Browser view.
You can assign one loop per Pad.
To synchronize a loop to SONAR’s tempo
• Click the Sync button that’s on the Pad that the loop is assigned to. The Sync button lights up
when it’s engaged.
To set a Loop to Follow SONAR pitch markers
1. In the Pad Editor, select the track you want to follow pitch markers.
2. In the Pad Inspector, click the Pitch Markers control. The Pitch Markers control appears green
when enabled.
To assign MIDI keys to a pad
1. Click the Pad that you want to trigger.
2. Click the Keyboard button in the Loop view to display the Key Map view.
The blue keys between the Pitch Range markers show what MIDI keys trigger the Pad. The
yellow key is the Root Note , which triggers the loop at its original pitch.
3. Drag the edge of the Pitch Range (the blue keys within the white triangle markers) to change the
range of notes that trigger the loop. If the loop’s pitch changing function is turned on, each MIDI
key in the trigger range transposes the loop by the trigger note’s distance from the Root Note.
4. Drag the yellow key to change the Root Note . The Root Note does not have to be in the trigger
range.
5. In the MIDI Chn field, choose the MIDI channel that the MIDI notes will use to trigger this pad
with.
You can assign the same key ranges to all the Pads if you want. You can assign different velocity
ranges to each pad, also.
To assign a velocity range to a pad
1. Click the Pad that you want to assign a velocity range to.
2. Click the Keyboard button in the Loop view to display the Key Map view.
3. In the Velocity Low field, fill in the lowest velocity that you want to trigger the Pad with.
4. In the Velocity High field, fill in the highest velocity that you want to trigger the Pad with.
Now the Pad only plays its loop when the Pad receives a MIDI note within its velocity range.