CAKEWALK sonar x3, Справочное руководство

Страница: 1523 / 2094

1523 Cyclone
Loop bin
The Loop bin, located right below the Cyclone toolbar, is where you can place loops you want to use
in Cyclone. From the Loop bin you can drag and drop loops onto a Pad or into the Pad Editor.
A. Current Loop B. Loops C. Click to delete selected loop D. Click to load a loop
Tails The tails feature extends the “tail” or decay of a slice which may otherwise have
ended prematurely, drowned out by the next slice. This is particularly useful when
you substitute a longer slice with a shorter one leaving room for a tail to sound.
Latch The Latch option gives you a second mode for triggering pads. In Latch mode, a
Groove Clip plays continuously when triggered until it is triggered again. With Latch
mode disabled, a pad only plays as long as the key or mouse button is held and
stops when you release. If you want to set all pads to the same Latch state, hold
down the SHIFT key while setting the Latch for any one pad.
Pitch Markers This option forces Cyclone to follow SONAR’s Pitch markers. When a Pitch marker
is encountered, the loop is transposed by the same number of semi-tones as the
pitch change in SONAR.
Control Description
Table 248.
A
B
C
D