CAKEWALK sonar x3, Справочное руководство

Страница: 579 / 2094

579
Track Inspector overview
Inspectors
“Inspectors” on page 571
Track Inspector controls
The controls in the Track Inspector vary depending on the current track type.
Control Description
Audio
track MIDI
track Instrument
track
Bus Main
Clip Show/hide the Clip Properties Inspector. -- -- -- -- --
Track Show/hide the Track Properties Inspector. -- -- -- -- --
Dock/Undock Dock/undock the Inspector pane. -- -- -- -- --
Docking
Options The Docking Options menu lets you dock/
undock/float/collapse the Inspector pane.
-- -- -- -- --
Gain Pre-fader input gain for fine tuning a track’s
volume or input level to a bus. x x
Velocity offset The change in velocity (volume) that will be
applied to notes in the track on playback;
ranges from –127 to +127.
x x
Input pan Sets the pan of the audio data sent to the
bus. x
ProChannel
(Producer
only) ProChannel is an extended channel strip
that provides high-quality Compressor,
Equalizer, and Tube saturation processing
for each channel. See
“ProChannel
(Producer and Studio only)” on page 999.
x x x
Effects bin The patch point for a track’s plug-ins or soft
synths. x x x x
Send Enable Activates a send module, which sends a
copy of the track signal to a bus. x x x
Send Level Controls volume of audio data sent by the
send module. x x x
Send Pan Adjusts the send pan setting. x x x
Send Pre/
Post switch Pre (pre-fader) means that the Send signal
goes to the bus prior to the track’s volume
fader; post means the Send signal goes to
the bus after the volume fader. x x x
Send
destination Displays name of bus that the Send is
sending data to. x x x
Channel The MIDI channel through which the notes
will be played. x x
Table 115. Track Inspector controls