CAKEWALK sonar x3, Справочное руководство

Страница: 1007 / 2094

1007 ProChannel (Producer and Studio only)
ProChannel compatibility with SONAR X3 base version
ProChannel is only included with SONAR X3 Producer and Studio, not with the base version of
SONAR X3. If a project was created in Producer or Studio and loaded into the base version of
SONAR X3, the project might sound different because ProChannel is not available. However, if you
resave the project in the base version of SONAR X3, all ProChannel settings will be persisted and
available if you later load the project into Producer or Studio again.
Loading legacy projects
If you load a pre-SONAR X3 project that uses the per-channel Sonitus:fx EQ, the ProChannel
QuadCurve Equalizer module will be disabled.
If you want to keep and edit the Sonitus:fx EQ, double-click the small Equalizer graph in the
collapsed ProChannel.
To replace the Sonitus:fx EQ with the ProChannel QuadCurve Equalizer, do
one of the following:
• Press CTRL and click the Equalizer enable/disable button .
• Enable the Equalizer module. SONAR prompts if you want to switch from the Sonitus:fx EQ to the
ProChannel QuadCurve Equalizer.
Loading X3 projects in SONAR X1c or earlier
• SONAR X1c and earlier only support a single compressor module per channel. If you are using
multiple compressor modules on a channel in a SONAR X3 project, SONAR X1c (or earlier) will
only load one of the compressors.
• SONAR X1c and earlier always shows the Compressor, Equalizer and Tube Saturation modules
on all channels. If you load a SONAR X3 project that doesn’t use all the default modules, SONAR
X1c will automatically recreate the missing modules.
• If you load a SONAR X3 project that has ProChannel Global Bypass enabled, you will not be able
to unbypass that ProChannel instance in SONAR X1c.
See:
“ProChannel modules and controls” on page 1008
“PC76 U-Type Channel Compressor module (Producer only)” on page 1014
“PC4K S-Type Bus Compressor module (Producer only)” on page 1016
“QuadCurve Equalizer module” on page 1019
“Tube Saturation module (Producer only)” on page 1026
“Console Emulator module (Producer only)” on page 1027
“FX Chain module” on page 1031
“Tape Emulator module (Producer only)” on page 1039
See also:
“Track Inspector overview” on page 576
“Console view” on page 1971
“Mixing” on page 879