CAKEWALK sonar x3, Справочное руководство

Страница: 672 / 2094

672
AudioSnap (Producer and Studio only)
Fixing timing problems in audio clips
To Groove Quantize an audio clip
The Groove Quantize command aligns transients with a groove that’s on the Clipboard or a pre-
existing groove file. If you want to copy the timing from another audio clip to the Clipboard, see “To
extract MIDI timing from an audio clip” on page 679.
1. Select the audio clip you want to groove quantize.
2. Press A to open the AudioSnap palette.
3. On the Process menu, click Groove Quantize .
The Groove Quantize dialog box appears.
4. In the Groove File field, select either Clipboard or the file that the groove pattern you want to
use is saved in.
5. In the Groove Pattern field, select the groove pattern that you want to use.
6. Select the Resolution value that you want to quantize to.
7. Make sure the AudioSnap Beats check box is selected.
8. Click OK .
To extract the groove from one clip and apply it to another clip
1. Select the audio clip you want to extract the groove from.
2. Press A to open the AudioSnap palette.
3. Click the Extract Timing button.
The clip’s groove is extracted and vertical Pool lines are displayed to indicate the extracted
transients.
4. Select the clip you want to apply the groove to.
5. Click the Apply Groove button.
The groove is applied to the selected clip and the Pool is cleared.
To manually match transients across different tracks
1. Select the Smart tool in the Control Bar.
2. Assign the track’s Edit Filter control to Audio Transients .
Audio clips show transient markers and the AudioSnap palette appears.
3. In the Control Bar’s Snap module, select the Landmark Events button .
Note 1: If events do not appear to snap to audio transients, go to Edit > Preferences >
Customization - Snap to Grid (or right-click the Snap to Grid button ) and make sure the
Audio Transients check box is selected under Landmarks .