CAKEWALK sonar x3, Справочное руководство

Страница: 564 / 2094

564
Control Bar overview
Event Inspector module
The Event Inspector module lets you view and modify settings for selected clips and MIDI Note
events. If you select multiple notes, the
Event Inspector module displays the note value if all
selected note values are the same. If the note values are different, the Event Inspector does not
display anything.
To show/hide the Event Inspector module
Right-click the Control Bar and select Event Inspector Module .
Figure 189. The Event Inspector module.
A. Time B. Duration C. Pitch D. Velocity E. Channel
The Event Inspector module contains the following controls:
•
Time. Start time of the selected event(s), specified as a valid M:B:T time value. Separate values
with a colon or a space. For example, measure 2, Beat 3, Tick 720 would be written as 2:3:720.
• Duration. Duration of the selected event(s), specified as a PPQ value. You can also specify a
percentage of the current duration value. For example, to double the duration, type 200% and
press ENTER.
• Pitch. Pitch of the selected event(s), specified as note names (C0 through G10) or note
numbers (0 through 127). You can also use a modifier to raise or lower the value by a number of
half-steps. To raise the pitch by 2 half-steps, type
+2 and press ENTER. To lower the pitch by 2
half-steps, type -2 and press ENTER.
• Vel. Velocity value of the selected event(s), specified as a value between 0 and 127. You can
also use a modifier to raise or lower the current velocity value (+/- 0 through 127). You can also
specify a percentage of the current velocity value. For example, to double the velocity, type
200%
and press ENTER.
• Channel. MIDI channel assigned to the selected events, specified as a value between 1
through 16.
A
C
B
D E