389 . . .
–
–
–
–
Section
4
After unlocking the fuel door,
press on the rear edge of the fuel
door and it will pop open.
Remove the fuel filler cap by
turning it slowly counter-
clockwise. The cap has a spring in
it. If you let go of the cap too soon,
it will spring back to the right.
Replace it by turning it clockwise.
When you put the cap back on,
continue to turn it clockwise until
you hear a clicking noise.
Make sure the fuel cap is properly
installed.
If the fuel cap is not installed
properly, the
TIGHTEN GAS CAP
message will appear on the Driver
Information Center display. See
"Driver
Information Center Messages" in
Section 1.
If the fuel cap is not fully installed,
fuel may evaporate into the
atmosphere. If this happens the
malfunction indicator light may
come on.
See "Malfunction Indicator Light"
under "Indicator and Warning
Lights" in Section 1 for more
information.
When closing the fuel door, make
sure that it latches.
If the fuel door is not securely
latched, the fuel door will not lock
when the driver’s door is locked.
AKENG40_CTS Page 389 Wednesday, July 23, 2008 11:47 AM
Содержание 2008 CTS-V
Страница 27: ...27 Section 1 AKENG40_CTS Page 27 Wednesday July 23 2008 11 47 AM...
Страница 256: ...AKENG40_CTS Page 256 Wednesday July 23 2008 11 47 AM...
Страница 310: ...AKENG40_CTS Page 310 Wednesday July 23 2008 11 47 AM...
Страница 512: ...AKENG40_CTS Page 512 Wednesday July 23 2008 11 47 AM...