Instrumentation and Controls
. . . 38
If the light still stays on, or if it
comes on again while you're
driving, your vehicle needs service.
Until you get it fixed, the brakes
will still work, but without the
antilock feature.
If the system senses a problem, a
message will appear on the
display.
See "Driver Information Center
Messages" later in this section for
more information.
If the regular brake system
warning light is also on, the
vehicle does not have antilock
brakes and there is a problem with
the regular brakes. Pull off the road
and stop carefully. Have the
vehicle towed for service.
See "Brake System Warning Light"
earlier in this section.
Malfunction Indicator Light
This light monitors the fuel,
ignition and emission control
systems.
This light should come on when
the ignition is on but the engine is
not running, as a check to show
you it is working properly.
If the light does not come on when
the ignition is turned on, you may
have a problem with a fuse or
bulb. Have it fixed right away so it
will be ready to warn you if there is
a problem.
If it stays on or comes on while
you are driving, there may be a
problem with this system.
Have it checked right away.
If the light flashes, a misfire has
been detected.
If an emission control system
malfunction is detected, the light
will shine steadily.
AKENG40_CTS Page 38 Wednesday, July 23, 2008 11:47 AM
Содержание 2008 CTS-V
Страница 27: ...27 Section 1 AKENG40_CTS Page 27 Wednesday July 23 2008 11 47 AM...
Страница 256: ...AKENG40_CTS Page 256 Wednesday July 23 2008 11 47 AM...
Страница 310: ...AKENG40_CTS Page 310 Wednesday July 23 2008 11 47 AM...
Страница 512: ...AKENG40_CTS Page 512 Wednesday July 23 2008 11 47 AM...