Instrumentation and Controls
. . . 228
To activate the express open mode
and open the window all the way,
press the front of the switch all the
way down to the second position
and release.
To stop the window while it is
lowering, pull the switch up
briefly.
To raise the window, pull the front
of the switch up to the first
position and hold it.
The front power windows have an
Express Close feature.
To activate the express close mode
to fully close the window, lift the
front of the switch to the second
position, then release it.
To stop the window while it is
closing, tap the switch or pull the
switch up briefly.
The switches continue to work
even after the ignition has been
turned off, until either a door is
opened or until ten minutes have
passed.
See "Retained Accessory Power"
for more information.
If electrical power to the windows
is interrupted, you'll need to
reprogram the express close
feature for each front window.
To reprogram a window once
electrical power is restored:
1. The ignition must be on or in
accessory mode, or Retained
Accessory Power must be
active.
2. Close all the doors.
3. Press and hold the window
switch to fully open the
window.
4. Pull up the window switch to
fully close the window and
keep holding the switch for
about three more seconds.
Repeat the steps for the other front
window.
AKENG40_CTS Page 228 Wednesday, July 23, 2008 11:47 AM
Содержание 2008 CTS-V
Страница 27: ...27 Section 1 AKENG40_CTS Page 27 Wednesday July 23 2008 11 47 AM...
Страница 256: ...AKENG40_CTS Page 256 Wednesday July 23 2008 11 47 AM...
Страница 310: ...AKENG40_CTS Page 310 Wednesday July 23 2008 11 47 AM...
Страница 512: ...AKENG40_CTS Page 512 Wednesday July 23 2008 11 47 AM...