309 . . .
–
–
Section
2
Be sure to use an anchor point
located on the same side of the
vehicle as the seating position
where the child restraint will
be placed.
2. Place the child restraint on the
seat.
3. Attach the child restraint’s
attachment points to the
anchors in the vehicle, and
tighten as necessary. Follow
the instructions that come
with the restraint.
CAUTION
Each top strap anchor or set of
attaching points is designed to
hold only one child restraint.
Attaching more than one child
restraint to a single anchor or
attaching point could cause the
anchor or attaching point to
come loose or even break
during a collision. A child or
others may be injured. To
prevent injury to people and
damage to the vehicle, attach
only one child restraint per
anchor or attaching point.
4. For a forward-facing child
restraint, attach the top strap
to the top strap anchor.
See "Top Strap" earlier in this
section.
Consult the manufacturer's
instructions to determine
when and how to tighten the
top strap.
5. Push and pull the child
restraint in different directions
to make sure it is secure.
To remove the child restraint,
unhook the top strap (if equipped)
from the top strap anchor and
then disconnect the anchor
points.
If you have been in a collision, the
anchoring system may have been
damaged. Repairs may be
necessary even if the anchoring
system was not used at the time of
the collision. Have the anchoring
and restraint systems inspected
after a collision.
AKENG40_CTS Page 309 Wednesday, July 23, 2008 11:47 AM
Содержание 2008 CTS-V
Страница 27: ...27 Section 1 AKENG40_CTS Page 27 Wednesday July 23 2008 11 47 AM...
Страница 256: ...AKENG40_CTS Page 256 Wednesday July 23 2008 11 47 AM...
Страница 310: ...AKENG40_CTS Page 310 Wednesday July 23 2008 11 47 AM...
Страница 512: ...AKENG40_CTS Page 512 Wednesday July 23 2008 11 47 AM...