Instrumentation and Controls
. . . 64
DELAY DOOR LOCK
You can program your power door
locks to delay locking until every-
one has gotten out of the vehicle
and closed their doors.
Press the
button to enter the
submenu.
While in this submenu, press the
button repeatedly to scroll
through the following options:
•
OFF
The doors will lock immediately
when the power door lock
switch is pressed.
•
ON
This feature allows vehicle
locking to be delayed until all
doors have been closed for five
seconds.
If you press the power door
lock switch while any door is
open, you will hear three
chimes, indicating that this fea-
ture is active.
To override this feature and
lock the doors immediately,
press the power door lock
switch or the lock button on
the transmitter twice.
This is the default setting.
Note:
In vehicles equipped with the
remote keyless entry system,
the Delayed Locking feature
will not operate if the
removable key is left in the
ignition.
If your vehicle is equipped
with the keyless access
system and an ignition
control knob, the Delayed
Locking feature will not
operate if the ignition is on or
the keyless access transmitter
is left inside the vehicle.
•
NO CHANGE
Once the desired setting is
displayed, press the
button to
select it.
You may now either exit program-
ming mode or program the next
available feature.
To exit programming mode, see
"Exiting Programming Mode" later
in this section.
AKENG40_CTS Page 64 Wednesday, July 23, 2008 11:47 AM
Содержание 2008 CTS-V
Страница 27: ...27 Section 1 AKENG40_CTS Page 27 Wednesday July 23 2008 11 47 AM...
Страница 256: ...AKENG40_CTS Page 256 Wednesday July 23 2008 11 47 AM...
Страница 310: ...AKENG40_CTS Page 310 Wednesday July 23 2008 11 47 AM...
Страница 512: ...AKENG40_CTS Page 512 Wednesday July 23 2008 11 47 AM...