Cadillac 2008 CTS-V, Руководство пользователя

Страница: 251 / 530

251 . . .
–
Section 1
5. With your other hand, rotate
the actuator toward the center
of the engine compartment
until the windshield side of
the actuator faces the center
of the vehicle.
6. Push the actuator towards the
center of the vehicle until the
lower portion of the actuator
is no longer locked in place.
The actuator will still be
connected to the vehicle by
wires.
7. Use the wire cutters to cut the
wires as close as possible to
the bottom of the bellows
actuator.
8. Remove the actuator from the
engine compartment.
9. Tuck the wires attached to the
vehicle under the hinge to
prevent interference with
engine compartment
functions.
CAUTION
You or others could be injured
when the hood is lowered or
latched.
Be sure to keep fingers and
other body parts away from the
edge of the hood and fenders.
10. Carefully remove the hand
supporting the hood in the up
position. The hood struts will
control the hood while it
descends.
Do not latch the hood until
both actuators are removed.
11. Repeat the previous steps to
remove the second actuator.
12. Place both actuators inside the
trunk. Be sure to give them to
your dealer or repair facility.
AKENG40_CTS Page 251 Wednesday, July 23, 2008 11:47 AM