Problems on the Road
. . . 480
CAUTION
• Do not substitute any liquids
for the proper coolant
mixture. The engine could
catch on fire and you or
others could be burned.
• Do not spill coolant on hot
engine parts.
CAUTION
The electric engine cooling fan
can start even if the engine is
not running. Be careful around
it.
Here's how to add coolant to the
intercooler system:
The vehicle should be parked on a
level surface.
1. To remove the cap when the
cooling system is no longer
hot, turn it slowly one quarter
turn to the left and then stop.
If you hear a "hiss", wait for
that to stop. The "hiss" means
there is still some pressure left.
Then, remove the cap.
2. Add the proper coolant
mixture to bring the fluid level
up to the
COLD FILL
mark on
the filler neck.
3. With the intercooler system
pressure cap off, start the
engine and let it run for a
couple of minutes.
4. Turn off the engine.
By this time, the coolant level
inside the filler neck may be
lower.
5. If the level drops to where
coolant is no longer visible in
the horizontal tube portion of
the filler neck, then with the
engine off, add more of the
proper coolant mixture until
the level is again visible in the
horizontal tube portion.
6. Reinstall the cap.
AKENG40_CTS Page 480 Wednesday, July 23, 2008 11:47 AM
Содержание 2008 CTS-V
Страница 27: ...27 Section 1 AKENG40_CTS Page 27 Wednesday July 23 2008 11 47 AM...
Страница 256: ...AKENG40_CTS Page 256 Wednesday July 23 2008 11 47 AM...
Страница 310: ...AKENG40_CTS Page 310 Wednesday July 23 2008 11 47 AM...
Страница 512: ...AKENG40_CTS Page 512 Wednesday July 23 2008 11 47 AM...