Cabletron Systems CSMIM-T1 Скачать руководство пользователя страница 86

Страница: 86 / 418

Chapter 4 Using the Main Window

4-12

CSMIM/Micro-CS Management Application Guide

❑

The

Pre-defined Groups

option displays system-supplied groups of

parameters. Each group is comprised of related Annex
parameters.

❑

The

User-defined Groups

list displays the parameter groups you

have created and saved with the

User-defined Parameter Groups

command.

❑

The

Annex Only List

option includes all parameters, excluding port

parameters.

❑

The

Async Port List

option displays asynchronous port

parameters

❑

The

Printer Port List

option includes printer port parameters.

❑

The

Enet Port List

option displays Ethernet port parameters.

❑

The

DS0 Channels List

option displays DS0 channel parameter

values.

❑

The

DS1 Line List

option displays T1 DS1 port parameter values.

If you choose

Pre-defined Groups

User-defined

Groups

, you can select one item. For all other

options you can select as many items as you

need.

When you click the mouse, the

Parameter Options

box displays the

corresponding list. When the list appears you can click the mouse button
on each list item you want to select.

Selecting a Parameter Option

To select an option:

Hold the mouse on the

Parameter Options

button

Highlight the option you want and release the button.

The list box changes according to the option you select.

Some commands require you to select an item from the list box. For
example, the

Set

command changes parameter values based on your

selections in this area.

Selecting Groups or Lists

To select items:

Содержание CSMIM-T1



































































































































































































































































































































































































































Результаты поиска

Содержание CSMIM-T1

Отзывы:

Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 86 / 418

Результаты поиска

Содержание CSMIM-T1

Отзывы: