Cabletron Systems CSMIM-T1 Скачать руководство пользователя страница 214 | Manualshive

Страница: 214 / 418

Cabletron Systems CSMIM-T1 Скачать руководство пользователя страница 214

Chapter 15 Comparing and Copying Parameters and Values

15-12

CSMIM/Micro-CS Management Application Guide

❑

The

Copy From

box displays the Annex list you created in the

main window. You can select a single Annex from this list. If
you need to add an Annex to the list, you can return to the main
window and reissue the

Copy

command.

❑

The

Copy To

box displays the same list as does the

Copy From

box, and allows you to return to the main window to add an
Annex as well. In this window, however, you can select more
than one Annex. If you intend to copy port parameter values
from one port to another on the same Annex, you need to select
the same Annex in both boxes.

Selecting Port Types

The port type button defines the kind of port parameters that will be copied.
All Annexes involved in the copy process must use the same port type.
This button displays based on the

Copy Option

you select at the top of the

screen. If you select:

❑

Main Window Params

, you can select the appropriate port type for

the parameter group or list you chose. For example, if you use
a group that includes asynchronous ports and you select
printer ports here, the copy command displays a warning and
will not use all asynchronous parameters. For more
information, refer to Identifying Errors in this chapter.

❑

Annex

Only Params

, you cannot use the port button or fields. You

cannot change port parameters.

❑

DS1 Line Params

, the corresponding option displays

automatically, as does port

2

. You cannot change this

information.

❑

Async Port Params

,

Printer Port Params

, or

Enet Params

, the

corresponding option displays automatically. You cannot
change the port type button.

Entering Port Numbers

The two port number fields list the ports involved in the copy process. You
can enter one port number in the left-hand field for the Annex from which
you are copying values, and one or more numbers (or a range of numbers)
in the right-hand field for the Annex to which you are copying values.

«
...
212
213
214
215
216
...
»

Содержание CSMIM-T1



































































































































































































































































































































































































































Отзывы:

Нет отзывов