manualshive.com logo in svg

Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 348 / 418

Поделиться
Скачать
Cabletron Systems CSMIM-T1 Скачать руководство пользователя страница 348

Chapter 19    Annex Parameters

19-48

CSMIM/Micro-CS Management Application Guide

ip_forward_broadcast

allows an Annex to broadcast a packet to the  SLIP or PPP interfaces.  
When an Annex receives a packet sent to a broadcast address (except 
0.0.0.0 and 255.255.255.255), it scans the interface list for SLIP or PPP 
and matches the broadcast address against the interface’s remote address 
using a subnet or net mask.  If these addresses match, the Annex copies 
the packet to that interface.  If you enter 

disabled

, the Annex does not scan 

the interface list and does not copy broadcast packets. 

ipencap_type

indicates whether the Annex LAN interface encapsulates IP packets in 
Ethernet Version 2 format or IEEE 802.3 Data Link Layer format. 

ipso_class

specifies the U.S. Department of Defense basic IP Security Option (IPSO) 
classification level included in TCP packets generated on Annex CLI, 
dedicated, or adaptive asynchronous ports. The option is not added to 
locally generated ICMP messages, RIP updates, or other system packets. 
The Annex does not check incoming packets for the presence of the IPSO.  

Type

Annex

Values

enabled or disabled

Default

disabled

Lists

Annex Only, Basic Annex

Type

Annex

Values

ethernet or ieee802

Default

ethernet

Lists

Annex Only, Basic Annex

Type

Async

Values

none, secret, topsecret, confidential, unclassified 

Default

none

Lists

Async Ports, Security

Содержание CSMIM-T1



































































































































































































































































































































































































































Отзывы:

Нет отзывов