Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 386 / 418

Chapter 19 Annex Parameters
19-86 CSMIM/Micro-CS Management Application Guide
session_limit_port
specifies the maximum number of active sessions the Annex allows on a
port at one time. You can enter
-1
to indicate that there is no maximum set.
short
_break
allows an Annex to return a user to the CLI prompt after receiving a break
of less than two seconds.
sigproto
indicates the signal protocols supported by each DS0 T1 channel.
slip_allow_dump
enables an Annex to dump its operational code across a SLIP link.
slip_load_dump_host
contains the IP address of the host from which an Annex receives a load
or to which it sends dumps over the SLIP interface. If you entered
sl
and a
Type Async
Values -1 to 16
Default 3s
Lists Async Port, Basic Async Port,
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, Idle Timer
Type T1 DS0
Values
loop-loop, loop-none, none-loop, ground-ground,
ground-none, none-ground, wink-wink, wink-none,
none-wink, immed-none, none-immed, none-none.
Default loop-loop
Lists T1_DS0
Type Async Port
Values enabled or disabled
Default enabled
Lists Async Port, SLIP