Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 118 / 418

Chapter 7 Setting Asynchronous Port Values
7-8 CSMIM/Micro-CS Management Application Guide
definition, places the edited version in the Annex
configuration file, and displays its name.
You cannot configure modem information if you select
multiple Annexes that do not use the same
configuration file on the same host. (The configuration
file does not have to reside on the same host as does
Annex Manager.) In addition, you cannot configure
modem information if you select one or more Annexes
where the preferred boot host is different from the
actual boot host.
The modem name that displays when the window first appears
depends on your port selections:
❑
If you selected one port, or multiple ports that use the same
modem, this field shows the current modem name.
❑
If you selected ports that use different modems, this field
will be blank. If you continue to use this window and do not
enter a name here, Annex Manager will not change
modem values when you press .
❑
If the modem name is not set for the ports you selected,
<undefined>
appears.
❑
If the ports you selected use a modem that does not appear
in the list, Annex Manager adds the name to the list,
displays a warning window, and creates a default modem
definition in the configuration file. You can press
to display, change, or delete this definition.
For detailed information about the
Edit Modem
Window,
refer to .
The
Interface Options
box displays information in the
Settings
,
Address Assignment
,
Interface Protocol
,
AppleTalk
,
Rlogin/Telnet
, and
Dedicated
boxes.
❑
The
Settings
box displays address and protocol information for
the ports you selected.
❑
Local Address
defines the IP address for the port on the Annex
side of a link when the Annex does not obtain the address
from the host’s
acp_dialup
file.
Apply
Edit Modem