manualshive.com logo in svg

Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 377 / 418

Поделиться
Скачать
Cabletron Systems CSMIM-T1 Скачать руководство пользователя страница 377

CSMIM/Micro-CS Management Application Guide

19-77

printer_map_to_upper

allows an Annex to convert lower case characters to upper case before it 
transmits characters to a printer. This parameter is used for older printers 
that do not support lower case characters.

printer_name

specifies the printer used by the 

tn3270

 command’s print-screen function. 

You must enter a name listed in the 

/etc/printcap

 file on the remote host by 

the 

printer_host

 parameter. Please refer to the 

CSMIM/MicroCS 

Administrator’s Guide for UNIX for more information.

printer_tcp_keepalive

overrides 

tcp_keepalive

 for connections from applications such as 

aprint

 or 

rtelnet

 to one or more printer ports. If you use 

0

 (Annex Manager’s default 

value), the keep-alive timer uses the value set by the 

tcp_keepalive

 parameter. 

You can enter 

255

 to disable the keep-alive mechanism for the printer port. 

printer_type

specifies the type of printer attached to the port.  

Type

Printer

Values

enabled or disabled

Default

disabled

Lists

Printer Port

Type

Async

Values

Printer name from 

/etc/printcap

 file

Default

“ “ (null string)

Lists

Async Port, TN3270

Type

Printer

Values

0 to 255 minutes

Default

0 minutes

Lists

Printer Port, Command Line Editing

Type

Printer

Values

centronics or dataproducts

Default

centronics

Lists

Printer Port, Command Line Editing

Содержание CSMIM-T1



































































































































































































































































































































































































































Отзывы:

Нет отзывов