Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 104 / 418

Chapter 6 Selecting General Settings
6-2 CSMIM/Micro-CS Management Application Guide
Using the General Window
The
General
window includes basic Annex information in
Boot Info, Logging
,
and
Time
boxes.
The
Boot Info
box uses the following fields:
❑
Default Host
identifies the host used for the host server and for
all services unless you enter host addresses in the
General
(continued
) window. When this window first appears, the
Default
Host
field displays the current address in the Annex's
pref_load_addr
parameter.
When you configure an Annex for the first time, the
Security Preferred Host
,
DHCP Preferred Host, Nameserver Preferred
Host
,
Nameserver Alternate Host, Time Host, Logging Host,
and
Dump
Host
fields are
0.0.0.0
. In this situation, Annex Manager sets those
fields to the address in the
Host
field. You can change these
addresses using the
General (continued)
window.
❑
Load Sequence specifies available network interfaces and the
order in which they are used for a down-line load or an up-line
dump. You can list more than one interface by using commas
to separate interface names. You can enter:
❑
net
to specify a local area network.
❑
sl + port number
(e.g.,
sl2
) to specify a SLIP line. If you enter
sl
and a port number, you must enter an address in the
slip_load_dump_host
parameter.
❑
self
to instruct an Annex to boot its image from the Flash
ROMs. Since the Annex cannot dump back to itself, you
should include a secondary interface here by entering
self,net
or
self,sl+port number.
❑
Boot Image contains the image file name loaded by default
when the Annex is booted. This name can use up to 100
characters.
❑
Config File defines the name for the configuration file
maintained on the boot host. The Annex uses this file for
information on gateways, rotaries, macros, and services. It
must reside in the
/usr/spool/erpcd/bfs
directory.