Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 384 / 418

Chapter 19 Annex Parameters
19-84 CSMIM/Micro-CS Management Application Guide
rts_signal
controls the RTS (Request to Send) signal for the port. Entering a value
for an idle port produces an error condition.
If you change the value for this parameter and then
reset a port or reboot an Annex, the parameter will
return to its original default value. Therefore, you must
press in the Reset Parameters window to prevent the
reset process and to use the parameter values you entered.
rwhod
determines whether the Annex listens for RWHO broadcasts when it builds
the host table.
security_broadcast
determines whether an Annex broadcasts for security validation if the
preferred security servers are not available.
server_capability
defines an Annex as a file server host. You can enter:
❑
all
to define the Annex as a file server for the configuration,
operational image, and message-of-the-day files
.
❑
config
to define the Annex as a file server for configuration files.
❑
image
to define the Annex as a file server for Annex operational
code.
Type Async
Values unknown, high, low
Default unknown
Lists Async Port
Type Annex
Values enabled or disabled
Default enabled
Lists Annex Only, Modem
Type Annex
Values enabled or disabled
Default enabled
Lists Annex Only, Security
Cancel