Cabletron Systems CSMIM-T1 Скачать руководство пользователя страница 144

Страница: 144 / 418

Chapter 9 Editing Modem Definitions

9-6

CSMIM/Micro-CS Management Application Guide

If you edit a modem definition that exists in the
Annex configuration file, your changes modify
the current file. If you edit a definition for which

defaults exist, Annex Manager copies the definition
and places it in the Annex configuration file. You can
use the

Revert to default modem values

button in this case to

see original values.

Copy the configuration file to alternate load hosts and to self-boot

units

For more information, see

Understanding the Modem

Database later in this chapter.

Removing a Definition

You can remove a modem definition only for Annexes that have
asynchronous ports. To remove a definition:

Removing Definitions

Display the

Edit

Async Ports

window and choose the appropriate

settings in the

Port Options

box.

In the

Modem

box’s

field, choose the modem whose definition you

want to remove

The

Edit Modem

window appears with current values for the

modem you selected.

You can remove only those definitions you
created or modified. You cannot remove
Annex Manager’s default definitions, since

they exist in

include

files.

Press

A confirmation window appears. You can press

continue or

to return to the window.

Remove

Cancel

Содержание CSMIM-T1



































































































































































































































































































































































































































Результаты поиска

Содержание CSMIM-T1

Отзывы:

Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 144 / 418

Результаты поиска

Содержание CSMIM-T1

Отзывы: